Economic Low Cost Mini Drinking Water Linear Type Split Bottle
Filling Machinery
The Semi automatic bottle filling machine is precisely filling all
kind of non-carbonated beverage and low thickness beverage such as
vitamin water, nutritive water, pure water, mineral water, drink
water, mountain spring water etc. It connection bottle washing,
filling and capping machine.All parts of the small water bottling
machine is made of stainless steel materials, it cannot cause rust
to influence the filling beverage, it not only reach the standard
of sanitation, but also prolong its using life.
1.No bottle no filling, no bottle no capping, a high degree of
automatization and simple human-machine operation display screen.
2.With clamp hanging the bottle neck, the feed speed is very quick
and the bottle will not be deformed.
3.Adopting advanced bottleneck technology to wash bottle mouth, it
avoids the contact with the thread nipple, which is more sanitary.
4.Adopting bottleneck technology in bottle conveying, there is no
need to adjust the height, but only to change the shield related
with the bottle diameter.
Bottle Rinsing Machine
Material: 304 Stainless steel
12 bottles are running on the conveyer belt with photo electricity,
the bottle cylinder will go out, meanwhile push the bottle into
bottle support ring, and bottle neck support catch the bottle neck,
than main shaft turned 180degree under gear wheel. Let bottle’s
mouth face to land, jetting liquid into bottle, after a few
seconds, the main shaft will be back, than finishing the washing.
| Specification & technical parameters of CGF Series washing machine |
| Type | CGF-12A |
| Number of bottles washing | 12 bottles |
| Production capacity | 2000-3000B/h |
| Applicable bottle's diameter | ¢56-¢100mm |
| Bottle's height | 160-310mm |
| Main machine's power | 0.75kw |
| Weight(N/G) | 800/850kg |
| Voltage | AC380±5% 50HZ |
| Outer dimension (mm) | 1200*1100*1700 |
| Packing size (mm) | 1450*1350*1950 |
Water Filling Machine
Material: 304 Stainless steel
Washing finished bottle is conveyed into filling position ,
cylinder push and hold the plate which can hitch bottles , the
mouth of bottle can open the valve , finishing filling , plate
which can hitching bottle will running down, the valve will closed
automatically, the time lasting of filling can be adjusted.
| Specification & technical parameters of CGF Series filling machine |
| Type | CGF-12 |
| Number of bottles filling | 12 bottles |
| Production capacity | 1500-3000B/h |
| Bottleneck's inner diameter | ¢15-¢25mm |
| Bottle's body's outer diameter | ¢55-¢95mm |
| Bottle's height | 160-310mm |
| Speed-adjusting electromotor | 0.75kw 125-1250r/min |
| Speed-down electromotor | WHT100-50V III |
| Weight(N/G) | N.W:1000Kg G.W:1250Kg |
| Voltage | AC380±5% 50HZ |
| Outer dimension (mm) | 1200*1100*2000 |
| Packing size (mm) | 1250*1050*2250 |
Bottle Capping Machine
Material: 304 Stainless steel
The working is intermission when running. There are six positions
for capping, and have 1 capping head, can automatically capping.
| Specification & technical parameters of CGF Series sealing machine |
| Type | CGF-1 |
| Number of bottles sealing | 1 bottle |
| Production capacity | 1500-3000B/h |
| Applicable Bottle diameter | ¢56-¢100mm |
| Bottle's height | 160-310mm |
| Theftproof cap's size | ¢28×15mm |
| Weight(N/G) | N.W:600Kg G.W:650Kg |
| Voltage | AC380±5% 50HZ |
| Outer dimension (mm) | 930*700*2100 |
| Packing size (mm) | 1180*950*2350 |
NOTE:
Make It Easy To Start Bottled Water Business.
1. Supply Completely Bottled Water Plant Machinery;
2. Supply Bottled Water Materials Like PET Preform, Bottle Cap and
Label, Packing Roll PE Film;
3. Bottle Design For Choice, Free Drawing Factory Layout.
4. Oversea Installation.(80 USD Per Day)
